Santa Cruz Bullit 630Wh 2024

Description

Santa Cruz Bullit 630Wh 2024 E-Bike

The CC Carbon frameset utilizes a dedicated VPP™ (Virtual Pivot Point) suspension system within the Santa Cruz Bullit 630Wh chassis for structural alignment and 170 mm of rear wheel travel. Wheel assembly features a MX (Mixed) “Mullet” configuration with a 29-inch front and 27.5-inch rear wheel paired with Maxxis Assegai/Minion DHR II tires for technical agility. Suspension architecture employs a Fox 38 Float Performance fork providing 170 mm travel to absorb extreme enduro impacts. Braking regulates speed via SRAM Code R 4-piston hydraulic calipers for professional-grade thermal management. This platform incorporates a flip-chip for geometry tuning and a dropper post to maintain elite downhill utility.

The Shimano Steps EP801 motor generates 85 Nm torque within the Santa Cruz Bullit 630Wh electrical system for dominant climbing capability on the steepest trails. Energy storage consists of an integrated Shimano battery providing 630 Wh capacity housed in the down tube for a low center of gravity. Drivetrain operations utilize a SRAM GX Eagle 12-speed system for precise and durable mechanical power management. The interface connects via a Shimano SC-EM800 display for real-time telemetry and assist mode selection. Charging occurs through a protected frame port while the system firmware regulates power delivery based on high-frequency torque sensor feedback.

Key Features of Santa Cruz Bullit

• Shimano Steps EP801 motor generates 85 Nm torque
• Integrated 630Wh battery for technical trail range
• VPP suspension with 170 mm travel front and rear
• Mixed wheel (MX) setup for agility and traction
• SRAM Code R 4-piston hydraulic brakes regulate force
• CC Carbon frame for elite strength-to-weight ratio
• SRAM GX Eagle 12-speed drivetrain manages gears